XTRAC – DOMESTIC SECTIONAL AND TIP-UP GARAGE DOOR MOTORS
Does using your garage door sound like a castle lowering its drawbridge?
Unlike the garage door motors of yesteryear, the XTrac’s super quiet and powerful 24V DC motor is connected directly to the garage door and travels with it as it opens or closes. No more clanking chains results in a smoother and quieter ride.
No power? No problem. The XTrac isn’t fazed by any power issues – be they low voltages, spikes or even failures.
The XTrac can be set up in a matter of minutes, powers both sectional and tip-up doors and comes with a host of vital functions and features.
Quiet, safe and reliable. Everything you’d expect from CENTURION.
Novel operating principle and revolutionary design
The XTrac’s motor drives along a stationary chain housed inside the drive rail. The door opens and closes together with the travelling motor – no chain clatter means the whole operation is whisper quiet.
Dual power – ALWAYS on
You need to be somewhere in a hurry. The power goes out. You’re going nowhere. Unless you have the CENTURION XTrac garage door motor, that is. The XTrac switches seamlessly between mains and battery power in the event of a power outage, so it’s always on. You can even use solar power to charge the system.1
1. Consult Centurion Systems for assistance
Reliable DC motor
Our 24V geared DC motor provides enough power to move even the largest door quietly and reliably.
Adaptive anti-crushing control
The XTrac was designed with safety in mind! The built-in anti-crushing circuitry will cause the gate to stop and reverse if an obstruction is detected, helping to prevent serious damage or injury.
2. Use of infrared beams is highly recommended to maximise garage door safety and obstruction detection
Adjustable speed gives you ultimate control
One operator to rule them all. The XTrac works on both sectional and tip-up doors and the opening and closing speed can be set to your liking. Combine this with soft start and stop, the CENTURION XTrac provides the ultimate control and most reliable operation of your door.
Lock in any position
For increased security, the manual override can be disengaged and then re-engaged in any position. If you’re going away on holiday you can electronically lock your XTrac so that not even a learned-in remote control can operate the door.
Look, Ma, no hands! If you forget to close your garage door, your XTrac will do it for you – if you’ve activated the Autoclose feature. Or maybe you’re moving stuff out of your garage and need the door to remain open – overriding Autoclose is as easy as pressing a button.
3. Infrared safety beams need to be installed to utilise the Autoclose feature
Onboard receiver with CENTURION code-hopping technology
A home security system that fits in your pocket. Our four button CENTURION code-hopping remote control utilises the same technology found in top of the range vehicle security systems and can control your XTrac, home alarm system, CENTURION automatic gate motors and whatever else you need to feel safe. Rest easy, knowing there’s a CENTURION standing guard.
Ease of installation and adjustment
Ready. Set. Go! The drive unit slides into the rail and the control box slots into position at the back, it’s as simple as that. Within minutes of arriving on site, the unit can be assembled, installed and set up. Such ease saves time, saves money!
Door service monitor
Using adaptive load sensing technology, our door service monitor keeps an eye on things and a courtesy lamp will flash when your door springs are worn and need maintenance.
Power supply flexibility
The XTrac garage door motor is built for a country where the power supply is unstable at the best of times. It will still open your garage door with a supply voltage as low as 180V AC or as high as 270V AC. Power spikes and low voltages mean nothing to the XTrac.
Courtesy Light Control
The XTrac’s onboard light is always at your beck and call. Have it work as a Courtesy Light, bathing your garage in a welcoming glow when the operator is activated, or switch it on and off as needed, using one of the Wireless Wall Switch or remote control buttons. Need to get a wrench to fix a leaky faucet in the middle of the night? Let the XTrac light the way!
Convenient template learning
In a hurry? Thanks to the XTrac’s intelligent template learning feature, you can learn all the buttons on your four-button remote control or Wireless Wall Switch in a set configuration in a matter of seconds.
Energy saving technology
Save the planet! Not only will the XTrac continue to operate during periods of unstable power or even power outages, but it is incredibly low on resources. In sleep mode it reaches a record low power consumption of 0.5W. If this energy saving technology isn’t enough, hook the XTrac up to a solar panel and politely inform the neighbours that you have a ‘zero-emissions’ operator’.